Aliphatic urethane is a two component,part A mostly Acrylic Resin and/or Polyester Resin. Part B is Hardener or Converter. Aliphatic urethane provides superior gloss and color retention, exhibiting a very high gloss wet look finish. Aliphatic urethane also has excellent flexibility, chemical and abrasion resistance. It is available in white, blue, red, green, and many other furniture & industrial colors.

Technical Information

Primer Recommendations

• Epoxy Primer or PU Primer for Steel
• Zinc -Itch Primer for Galvenise/Alluminum

Surface Preparation

• All surfaces must be sound, dry, clean and free from oil, grease, dirt, loose/flecking paint and other foreign substances

Mixing Instruction

• Mix Base part A and  add hardener part B into base part A and mix thoroughly until homogeneous. Allow to react in can for about 15 minutes (induction time). If thinning is necessary add thinner after the 15 min induction time.
• Take care of water in compressor air line because hardener is more sensitive to water, it will become hard very fast. Mixing ratio of A:B is available in 3:1 and 4:1

Features (Non-Immersion)

• Exterior and Interior Application
• Weather Resistance
• Moisture Resistance
• Solvent Resistance
• Salt Spray Resistance
• Fresh Water Resistance
• Abrasion Resistance
• Oil & Grease Resistance
• Acid Resistance
• Alkali Resistance
• Fast Drying

Uses

• For Industrial and Processing Equipment
• Exterior and Interior Storage Tank Structures
• Automobile and Commercial Transportation Vehicles
• Aircraft and Farm Machinery
• Oil  Field drilling and Service Equipment
• This aliphatic urethane product is also used as a chemical resistance and gloss retentive finish over epoxy and zinc rich primer (For Galvanize use Zinc-Itch Primer)

Drying Time at 30°C & 50 RH

• Surface Dry          15 Minutes
• Tack Free              60 Minutes
• Hard Dry               4-6 Hours
• Low Temperature, High Humidity, Thickness of film, and Poor Ventilation will increase the dry time.