Durable premium quality, low VOC Alkyd enamel for use on machinery, piping, storage tanks and equipment. Toughness and fast drying time provide application with minimum plant interruption.

It is the solvent based acrylic paint generally used for metal surfaces to give protection against corrosion and moist conditions. It is preferred to apply this paint over primer coated surface.

Technical Information

Recommended Primer

• Synthetic Oil base rust inhibiting Red-Oxide Primer for steel
• Synthetic Oil base white primer for wood and masonry

Surface Preparation

• All surfaces must be dry, clean, and free from oil, grease, dirt, mildew, efflorescence, loose and flaking paint and other foreign particles.
• New Steel – Prime with Red-Oxide metal primer
• Wood – Prime with solvent base wood primer
• Concrete, Plaster and Masonry – Prime with latex base primer. If new then allow it to cure at least 30 days prior to painting and PH must be lower then 10.
• Note : – Water Base latex primer is more resistance to alkaline surface (higher PH surface) compared to Alkyd base primer, therefore concrete, masonry and plaster surface always gives better result by using water base latex Primer.

Feature

• Durable & High Gloss
• Interior & Exterior Uses
• Excellent flow & Leveling
• Soap & Water Resistance
• Good Abrasion Resistance
• Good Atmospheric resistance
• Easy application by brush, roller and spray gun
• Good resistance to grease oil and water
• High solid & low VOC

Drying Time :- 30 minutes (approx.)