Chlorinated Rubber Paint
Chlorinated Rubber Paint is single pack high pigmented, non-bleeding, fast drying anticorrosive paints are available in white and industrial colours. It provides highly reflective and durable finish. This product is also used in industrial plants as anticorrosive paint.
Technical Information :
Finish | Semi-Gloss |
Colour | White and Industrial Colours |
Sp. Gravity | 1.1-1.2 |
Practical Coverage | 80-100 sq.ft/liter at 30-45 micron dry film thickness. It also depends on substrates and the method of application. |
Percentage Solid | 50-52 |
Viscosity | 100-120 Sec at 30 C in Ford Cup B4 |
Clean-up Thinner | Xylene |
Thinner | Xylene |
Recommended Primer
- Chlorinated Red-Oxide Primer / Epoxy Red-Oxide Primer for Steel
- Self Priming on Concrete, Masonry and asphalt
Surface Preparation
- All surface must be dry, clean, free from oil, grease and any other foreign particles. Fresh bituminous (asphalt) surface should be allowed to whither a minimum of 30 days prior to application and new concrete must cure for 30 days before application, PH must be 10 or lower
Feature
- Excellent anticorrosive against Acid Fumes
- Good anticorrosive against alkali fumes
- Highly durable and weather resistance
- Fast drying
- Low VOC
- Heat Resistance up to 90 C
- Resist Highway Traffic
Uses
- As an anticorrosive paint in chemical plant where Acid/Alkali Fumes are present
- This product gives better result on Asphalt and Concrete, It is useful for marking on Highway, Parking lots, Driveways, Warehouses and Roadside Curbs.
Drying Time : – At 30 C and 50 RH
- Surface Dry – 30 -45 Min
- Tack Free – 1-2 Hour
- Hard Dry – 6-8 Hour
- Low Temperature, High Humidity, Thickness of film and poor ventilation will increase this time
Reviews
There are no reviews yet.