Road Marking Paints
1 . Solvent Based
Description
Modified Alkyd Zone marking solvent born paint is high pigmented, non-bleeding, fast drying is available in white and yellow colour, it provides highly reflective and durable finish, this product can also be used with overlay glass beads for night time reflectivity.
Technical Information
| Finish | Flat |
| Colour | White & Yellow |
| Clean – Up Thinner | Xylene |
| Sp. Gravity | 1.4 – 1.5 |
| Percentage Solid | <65 |
| Practical Coverage | 40-50 sq.ft/liter or 150-175 sq.ft/gallon at 100 micron dry film thickness. It also depends on the substrates and the method of application |
| Viscosity | 120-150 Sec. In Ford Cup B4 at 30C |
| Thinner | Toluene or Naphtha |
Recommended Primer
- Self Priming on Concrete, Masonry and Asphalt
Surface Preparation
- All surface must be dry, clean, free from oil, grease and any other foreign particles, Fresh bituminous (asphalt) surface should be allowed to weather a minimum of 30 days prior to application and new concrete must cure for 30 days before application, PH must be 10 or lower.
Feature
- Highly durable and weather resistance
- Fast drying
- Low VOC
- Heat Resistance up to 90C
- Resist Highway Traffic
Uses
- This product gives better result on Asphalt and Concrete. It is useful for marking on highway, parking lots, driveways, warehouse, and curbs.
Drying Time : – At 30 C and 50 RH
- At 30 C and 50 RH
- Touch Dry – 15-30 min
- Low temperature, high Humidity, thickness of film and poor ventilation will increase this time
2. Water Base
Description
A waterborne Acrylic zone marking paint for use on new or weathered concrete or asphalt pavement provides durable line marking on street, parking lots, factory traffic zones, tennis courts, airports, driveways, warehouses etc… It is high pigmented, non-bleeding, fast drying paint available in white and yellow colour, it provides highly reflective and durable finish, this product can also be used with overlay glass beads for night time reflectivity.
Technical Information
| Finish | Flat |
| Colour | White &Yellow |
| Clean-up Thinner | Soap and Water |
| Sp. Gravity | 1.4-1.5 |
| Percentage Solid | <65 |
| Practical Coverage | 40-50 sq.ft/lit or 150-175 Sq. ft/gal at 100 micron dry film thickness, It also depends on the substrates and the method of application |
| Viscosity | 120-150 sec. in Ford cup B4 at 30 C |
| Thinner | Water |
Recommended primer
- Self priming on concrete, masonry asphalt
Surface preparation
- All surface must be dry, clean, free from oil, grease and any other foreign particles, Fresh bituminous (asphalt) surface should be allow to weather a minimum of 30 days prior to application and new concrete must cure for 30 days before application, PH must be 10 or lower
Feature
- Highly durable and weather resistance
- Fast Drying
- Low VOC
Uses
- This product gives better Result on Asphalt and Concrete. It is useful for marking on street, parking lots, factory traffic Zones, tennis courts, airport, driveways, and warehouse
Drying Time: – At 30°C and 50 RH
- Touch dry- 30-45 min
- Low temperature, high humidity, thickness of film and poor ventilation will increase this time.
OUR PRODUCTS
Reviews
There are no reviews yet.